117
Smart call blocker
Call block settings
f w/o Caller name - ask the caller to press the pound key (#) before the
call rings on your telephone. You can then answer the call.
Note: Robocalls will be classied as uncategorized calls. If you select Screening, the telephone screens and
lters these calls. It asks the caller to press the pound key (#) or announces his/her name before putting
the call through to you. There may be robocalls that you do not want to miss. For example, robocalls with
announcements or notices from schools or pharmacies. You can set up your star name list with these caller
names to allow their calls to get through to you. See Star name list on page 129.
Block list
Add numbers that you want to prevent their calls from ringing through.
The block list stores up to 1,000 entries.
Add a block entry:
Using a cordless handset:
1. Press MENU on the handset in idle mode to enter the main menu.
2. Press
CID or
DIR to scroll to Smart call blk, then press SELECT.
3. Press
CID or
DIR to scroll to Block list, then press SELECT.
4. Press
CID or
DIR to scroll to Add new entry, then press SELECT.
5. When the screen displays Enter number, use the dialing keys to enter a
number (up to 30 digits).
f Press
CID or
DIR to move the cursor to the le or right.
f Press MUTE/DELETE to erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID,
DIR or REDIAL/PAUSE repeatedly to nd the desired number. Press
INSERT to copy the number.
6. Press NEXT to move on to the name.
7. When the screen displays Enter name, use the dialing keys
to enter a name (up to 15 characters). Press a key repeatedly
until the desired character appears. The rst character of
every word is capitalized.
f Press
CID or
DIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
Enter name
Salesman _
SAVE
BACKSP