134
Smart call blocker
Call block settings
Play your current announcement of screening without caller
name:
Using a cordless handset or the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Smart call blk,
then press SELECT.
3. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Screening
annc, then press SELECT.
4. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Play annc,
then press SELECT.
5. Press
CID or
DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to w/o Caller
name, then press SELECT.
Record your name for all screening announcements:
Using a cordless handset or the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press
CID or
DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Smart call blk, then press SELECT.
3. Press
CID or
DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Screening annc, then press SELECT.
4. Press
CID or
DIR on the handset, or press qCALLER ID or pDIRECTORY on
the telephone base to scroll to Rec your name, then press SELECT. The
system announces, “Record aer the tone. Press stop when you are done.”
5. Speak towards the handset to record your name, if you are using the
handset, or speak towards the telephone base to record your name, if you
are using the telephone base. Press STOP to end recording.
To listen to the announcement with your recorded name again, scroll to Play
annc and press SELECT.
SMART CALL BLK
Calls w/o num
Uncategorized
Screening annc
SELECT
BACK
SCREENING ANNC
Rec your name
Play annc
Reset annc
SELECT
BACK
PLAY ANNC
w/ Caller name
w/o Caller name
SELECT
BACK
To Next Page
Loading...
Need help?
General
