Appendix
181
Display screen messages
Screen messages
PTT From HANDSET X
To devices:
X
One handset has started a PTT session to another handset and
telephone base.
PTT From HANDSET X
To devices:
X
One handset has started a PTT session to another handset.
PTT To HANDSET X
You have started the PTT process with a handset.
PTT To
BASE 0
You have started the PTT process with the telephone
base.
Push to talk Ended
The PTT session is ended.
Quiet mode on
QUIET mode is on.
Quiet mode is off
QUIET mode is turned o.
Rec mem full
The system recording time is full.
Rec mem low
The system recording time is low.
Registering...
Please wait
The handset is registering to the telephone base.
Registration
slots are full
The telephone base has the maximum of 12 handsets
registered to it.
Registration failed
The handset registration is not successful.
Remote voice
control ended.
The remote voice control operation is ended.
Ringer off
The ringer is turned o.
Ringer muted
The ringer is o temporarily while the device is ringing.
Saved to directory
An entry has been successfully saved in the directory.
Screened call
The Smart call blocker feature of the telephone has screened
a call and is putting the call through to you.
Setting up
Answering
system...
The telephone is playing voice guide.
Smart call blk
screening...
The Smart call blocker feature of the telephone is screening a
call and playing the screening announcement to the caller.
To Next Page
Loading...
Need help?
General
