Appendix
190
Troubleshooting
During power outage, I put a handset in the telephone base but the
system fails to power up.
f Make sure the handset you placed in the telephone base has enough
charge to power up the system.
f Try removing and re-installing the handset’s battery. Place the handset in
the telephone base again.
My cordless handset isn’t performing normally.
f Make sure you plug the power cord securely into the telephone base. Plug the
power adapter into a dierent working electrical outlet without a wall switch.
f Move the cordless handset closer to the telephone base. You may have
moved out of range.
f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
f Other electronic products such as HAM radios and other DECT phones, can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
Out of range OR No pwr at base appears on my cordless handset.
f Ensure you plug the telephone base in properly and the power is on.
f Place the cordless handset in the telephone base for one minute to allow
the cordless handset and base to synchronize.
f Move the cordless handset closer to the telephone base. You may have
moved out of range.
f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
f Other electronic products such as HAM radios and other DECT phones, can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
To Next Page
Loading...
Need help?
General
