24
Telephone operation
Intercom
At the telephone base:
You can place an intercom call to any system
handset or the telephone base.
1. Press /INTERCOM/TRANSFER on the telephone
base.
2. Press the or softkey to choose the desired
handset and press the OK softkey, or enter
the handset number (e.g. 1 for handset 1). The
called handset will ring, and its screen will
show INTERCOM FROM BASE.
-OR-
Press the or softkey to choose GLOBAL
PAGE and press the OK softkey, or press
to intercom with all the handsets and
the telephone base. The screen will show
PERFORMING GLOBAL PAGE. The telephone
base and all the handsets will ring, and the
screen will show GLOBAL CALL FROM BASE.
However, only a maximum of four handsets can
be used on an intercom call.
3. On the ringing handset, press
/X-FER/INTERCOM or SPEAKER to answer
the intercom call.
To end the intercom call:
On a handset:
Press OFF/CLEAR on cordless handset or place
the cordless handset in the charger.
At the telephone base:
Place the corded handset in the telephone base.
If you are using the speakerphone, press
/INTERCOM/TRANSFER or SPEAKER.
NOTES:
1. Before the intercom call
is answered, you can
cancel the intercom call
by pressing
/INTERCOM/TRANSFER
or CLEAR on the calling
telephone base.
2. If the called handset
is not answered within
30 seconds, the calling
telephone base will
display INTERCOM
CANCELLED!
3. Pressing OFF/CLEAR on
the handset or CLEAR
on the telephone base
will temporarily silence
the intercom ringer.
To Next Page
Loading...
Need help?
General
