AT&T UNIX - Layout Command

Using Office Commands
To see Help information on a particular topic
in the Table of Contents display, point to
that topic and press <Enter>.
Use the screen keys to display information on
related topics.
3 When you have finished viewing the Help
information, press <Exit> to return to the
previous display.
Layout COmmand
The Layout command shows the organization of the
folders contained in the file system, beginning with
the Filecabinet or current folder. If this command is
executed from the Office, the layout of the Filecabinet
is displayed. If the command is executed on an object
or folder that does not contain any other folders, you
see the message The current folder contains only files.
The Layout command is available both from the Commands
menu and from the SHOW LAYOUT screen key.
The layout display is organized as a menu of folders.
You can open, copy, move, or delete any folder
displayed in the Layout menu by pointing to the desired
folder and then selecting the desired command.
You can use either of these two methods to execute the
Layout command on an open object:
o Select !Layout! from the Commands menu.
o Press [SHOW LAYOUT] .
For more information on the various methods of entering
commands, see the "Selecting Objects and Entering
Commands" chapter in this section.
To show the layout of an object (this example uses the
Filecabinet of the tutor login) :
3-72
1 Open the Filecabinet.
You could also have only the Office open for
a complete Filecabinet layout.
2 Press [SHOW LAYOUT] or select ILayout! from
the Commands menu.