AT&T UNIX - Page 164

Using Office Commands
To move a folder:
1 Point to the folder you want to move.
2 Press <Move> or select I Move I from the
Commands menu.
The message Open destination folder and touch
PASTE appears.
3 Open or resume the folder in which you want
to place the moved folder.
4 Press [PASTE] or select IPastel from the
Commands menu.
The folder and its entire contents are moved to the
destination folder.
Moving Folders and Files from the Wastebasket
You can retrieve folders and files you have deleted by
moving them from the Wastebasket.
To move folders and files from the Wastebasket:
1 Resume the Office.
2 Select the Wastebasket and press <Enter>.
The contents of the Wastebasket appear.
3 Select the folders and files you want to move
by pressing <Mark> or <B3>.
4 Press <Move> or select IMovel from the
Commands menu.
The message Open destination folder and touch
PASTE appears.
5 Open or resume the folder to which you want
to move the folders or files.
6 Press [PASTE] or select IPastel from the
Commands menu.
The selected folders and files are moved to the
destination folder.
3-78