AT&T UNIX - Page 171

Using Office Commands
5 Point to the Number of copies: field and type
the number of copies you want printed.
6 When you are ready to print, press <Enter> or
point to the [OK] icon at the bottom of the
form and press <Bl>.
You see the message filename queued for printing on the
message line (filename is the name of your file).
Printing the Screen Display
You can print the entire screen display from the UNIX
PC console, if you have a dot-matrix printer attached
to it. This command cannot be executed from a remote
terminal logged into the UNIX PC.
To print your console screen's contents:
o Press and hold <Shift>, and then press
<Print>.
A message is displayed that asks you to wait until
printing can begin. The screen display is then added
to the print queue. As soon as the wait message is
removed from the screen, you can continue working, even
though printing may not have begun.
Note
Screen prints are sent to the first dot-
matrix printer set up in the Printer
Setup form, rather than the Default
Prihter. To send the screen print to a
different dot-matrix printer, remove all
configured dot-matrix printers from the
Printer Setup form; then configure the
desired printer (serial or parallel)
before configuring any others.
3-85