ATEQ CDF60 User Manual

Chapter 3 – Start up, adjust and measures
UM-23900B-U User manual ATEQ CDF60 Page 17/40
3.5. TEMPERATURE UNIT
This parameter selects the temperature unit displayed during the measurements.
Enter into the parameters menu, by pressing and
old the ENTER
during 3 seconds.
+/
-
40
.
00
cm
3/
m
i
n
AIR STD.COND.
FLOW : 09.36
TEMP. : 25.8°C
ATM.P : 1010.5 hPa
The PARAMETER menu is displayed. By using the
UP
and DOWN key select
TEMP. UNIT parameter.
PARAMETER
STD.COND. : YES
GAZ : AIR
>
T
EMP.UNIT.:
C
ELSIUS
Then press the ENTER key to modify the
parameter (the cursor moves on the right).
PARAMETER
FILTER : 0.5 s
PRESS.UNIT.: Pa
>
T
E
MP
.UNIT
.:
CELSIUS
By using the UP and DOWN key
choose the unit to be displayed.
UNIT
CELSIUS
FAHRENHEIT
>
KELVIN
Validate with the ENTER key.
PARAMETER
STD.COND. : YES
GAZ : AIR
>
T
EMP.UNIT.:
K
ELVIN
To return to the measurement mode, press
CANCEL
.
+/
-
40
.
00
cm
3/
m
i
n
AIR STD.COND.
FLOW : 09.36
TEMP. : 25.8°C
ATM.P : 1010.5 hPa

ATEQ CDF60 Specifications

General

Brand	ATEQ
Model	CDF60
Category	Test Equipment
Language	English