Chapter5 – Accessories, security and recycling
UM-23900B-U User manual ATEQ CDF60 Page 25/40
Chapter 5
ACCESSORIES, SECURITY AND RECYCLING
1. ACCESSORIES
1.1. POWER SUPPLY
The power supply of the CDP60
converts a network voltage (120 to 240
V AC) into a 24 V DC low voltage
supply. It has no power switch and
works as soon as it is plugged in.
It is protected against surges and short
circuits via a thermal fuse (Do not use
any other type of fuse).
Moreover, this supply can be plugged on all types of electrical plugs using different
removable pins.
The instrument is not designed to work during the battery charge.
1.2. SOFT CASE
The soft case is to put away the instrument
when out of use.
1.3. USB WIRE
To connect the instrument to a PC.