ATEQ CDF60 - Chapter 6 ERROR MESSAGES; Error Messages

Chapter 6 – Error messages
UM-23900B-U User manual ATEQ CDF60 Page 29/40
Chapter 6
ERROR MESSAGES
1. ERROR MESSAGES
The CDF60 can display the following error messages:
The applied flow is too high.
Reduce the flow and press on the
CANCEL key.
FLOW
OUT
OF
RANGE
Over Flow.........
Press [C] to return
AUTO
ZERO
The applied negative flow is too high.
Reduce the negative flow and press on the
CANCEL
key.
FLOW OUT OF RANGE
Under Flow........
Press [C] to return
A
UTO ZERO
The "LOW BAT" light flashes, the battery
level is too low for reliable operation.
When this light is on the instrument will be
quickly turned off automatically.
Charge the instrument.
LOW BAT