Chapter 4 - CDF60 Functions
UM-23900B-U User manual ATEQ CDF60 Page 22/40
2. SPECIALS CYCLES
The specials cycles allows doing commands on the instrument.
2.1. AUTO-ZERO
This special cycle make a zero sensor according to the atmospheric pressure.
Enter into the parameters menu by short press on
the ENTER
key.
+/- 40.00 cm3/min
AIR STD.COND.
17.61
Select the AUTO ZERO function by using the UP
and DOWN keys validate with the
ENTER
key.
>AUTO ZERO
PRINT
ENSOR DISPLAY
The instrument is doing its AUTO ZERO and return
to the measurement mode when the special cycle
is finished.
UTO ZERO
Note: this cycle allows taking over an offset linked to the temperature, position, etc…
To Next Page
Loading...
