Instruction Manual
44 2954 2510 03
3.4.6 Starting
Press the button “I”. During the starting procedure the display will show:
The system will automatically make 1 attempt to start the engine. The attempt will be indicated on
the display as: '1/1'.
If the engine failed to start the display will show the cause of the failure:
When the stopping procedure has ended, the time message disappears and the F1 function appears
(Reset). The display will show:
(O)
(I)
To cool down the starting motor, the system will wait 1 minute before the next
attempt can be made, meanwhile do not leave the compressor.
To Next Page
Loading...
Need help?
General
