Instruction Manual
60 2954 2510 03
4.6.2 Engine oil
PAROIL from Atlas Copco is the ONLY oil tested and approved for use in all engines built into Atlas
Copco compressors and generators.
Extensive laboratory and field endurance tests on Atlas Copco equipment have proven PAROIL to
match all lubrication demands in varied conditions. It meets stringent quality control specifications
to ensure your equipment will run smoothly and reliably.
The quality lubricant additives in PAROIL allow for extended oil change intervals without any loss in
performance or longevity.
PAROIL provides wear protection under extreme conditions. Powerful oxidation resistance, high
chemical stability and rust- inhibiting additives help reduce corrosion, even within engines left idle
for extended periods.
PAROIL contains high quality anti-oxidants to control deposits, sludge and contaminants that tend
to build up under very high temperatures.
PAROIL's detergent additives keep sludge forming particles in a fine suspension instead of allowing
them to clog your filter and accumulate in the valve/rocker cover area.
PAROIL releases excess heat efficiently, whilst maintaining excellent bore-polish protection to limit
oil consumption.
PAROIL has an excellent Total Base Number (TBN) retention and more alkalinity to control acid
formation.
PAROIL prevents Soot build-up
PAROIL is optimized for the latest low emission EURO -3 & -2, EPA TIER II & III engines running on
low sulphur diesel for lower oil and fuel consumption.
PAROIL 5W30 is a Synthetic ultra high performance diesel engine oil with a high viscosity- index.
Atlas Copco PAROIL 5W30 is designed to provide excellent lubrication from start-up in
temperatures as low as -25°C (-13°F).
PAROIL 15W40 is a mineral based high performance diesel engine oil with a high viscosity- index.
Atlas Copco PAROIL 15W40 is designed to provide a high level of performance and protection in
'standard' ambient conditions as from -15°C (5°F).
Synthetic engine oil PAROIL 5W30
Mineral engine oil PAROIL 15W40
Liter US gal Imp gal cu.ft Order number
can 5 1.3 1.1 0.175 1604 6060 00
can 20 5.3 4.4 0.7 1604 6059 00
Liter US gal Imp gal cu.ft Order number
can 5 1.3 1.1 0.175 1615 5953 00
can 20 5.3 4.4 0.7 1615 5954 00
barrel 210 55.2 46 7.35 1615 5955 00
To Next Page
Loading...
Need help?
General
