Settings Menu - Display tab
To enter this menu, tap on MON in the Information Bar across the top of the screen or tap
on the yellow settings icon in monitoring mode. Then select the Display tab on the bottom
of the page.
With this mode selected you have the option to change the screen brightness by adjusting
the slider when in Native mode. At 100% brightness, the image will be using the full
3000nit peak brightness of the display. As with any electronic screen device, increasing
the brightness will increase the power draw and battery life will be effected accordingly.
Adjustments can also be made to the Lift, Gamma and Gain of the display.
Constant Backlight:
Tap this icon to disable zonal backlighting and optimize the display brightness when
increased shadow detail is required.
Backlight
Adjust the strength of the backlight. Disabled during HDR monitoring
To Next Page
Loading...
Need help?
General
