What you also need - SDI Cables
SDI cables are robust physically and electrically; you should rarely have problems with
signal transmission unless your cables are either damaged or too long. Please remember
that SDI cables use locking connectors and will not simply pull out if they are jerked or
tripped over.
Therefore they can be a significant trip hazard, and also a hazard to your equipment,
which may be damaged if the cables are mishandled or of a low grade. Please ensure you
test and check your SDI cables for 4K. For longer runs, cables of a Belden 1694A spe-
cification are recommended
To Next Page
Loading...
Need help?
General
