Atomos Shogun Studio 2 User Manual

On initial connection of power the controller will go through a boot phase
and the fan will spin up. Once this has happened the power button can be
used to turn on the device.
The SHOGUN STUDIO 2 does not feature a software off function in the
menu and can only be powered down from the physical switch on the front
of the unit.
Once powered, pressing the power button for 3 seconds will turn both units off. After
power down the unit’s fan will remain on whilst the internal controller of the SHOGUN
STUDIO 2 shuts down.

Atomos Shogun Studio 2 Specifications

General

Brand	Atomos
Model	Shogun Studio 2
Category	Measuring Instruments
Language	English