Unit Name
You can also modify the unit name for your SHOGUN STUDIO 2. Creating a unique name
for each SHOGUN STUDIO 2 you are using can be very useful when using multiple devices
or with multicam shoots. Practicing good file management during production will save you
valuable time in post production.
The unit name serves two main purposes:
l
Drive Naming: Giving the unit a unique name aids with identification. Once you have
given it a name all drives subsequently formatted in the SHOGUN STUDIO 2 will bear
this name as a prefix.
l
File Naming: The current unit name appears at the start of the recorded clip name:
SHGCNCT_S001_S001_T001.MOV
To access the unit name, navigate to the FILE TAB where you can change the unit name.
To Next Page
Loading...
Need help?
General
