Single (Single Link) mode
When you have selected Tap 12G SDI 1 to select the SDI channel Source – 12G-SDI 1 or
12G-SDI 2.Select channel Source – 1 or 2.
Dual (Dual Link) mode
To monitor or a record a dual link SDI signal, connect the SDI inputs to the 12G inputs
IN1 and IN2, 3G IN3 and IN4 are unused in Dual Link mode. When a Dual Link signal is
detected, the indicators for channel 1 and channel 2 will be green.
To Next Page
Loading...
