ATX TranScend - Page 84

SNMP ENTERPRISE ATTRIBUTES
8-2 TranScend Chassis – Operation Manual
---
--- The module interface in this document is often described as laser or optics.
---
--- These values are returned when the objects return the following
--- conditions - These values apply to all innoTransTranscend objects.
---
--- Retrieving objects on slots that contain no module
--- Retrieving objects beyond installed laserIndex (e.g. 3rd optics on a 2
channel module)
--- Encountering internal errors such as time out.
---
--- Values:
--- DisplayString: NA
--- Unsigned32: 999
--- Integer32: -999
--- HeTenthCentigrade: -999
--- HeTenthdBm: -999
--- HeTenthdBmV: -999
--- HeTenthdB: -999
--- HeTenthVolt: -999
---
--
-- System Attributes :
--
-- S/W Ver, H/W Ver, Model Name, Serial Num
-- IP address, trap destination
innoTransTranscendSwVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The software version(s).”
::= { innoTransTranscendSystem 1 }
innoTransTranscendModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The model name for the device.”
::= { innoTransTranscendSystem 2 }
innoTransTranscendSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The serial number for the device.”
CHAPTER 8: