AU pt003 - Answering a Call; Returning a Call (Outgoing History;Incoming History)

34
Getting Ready
 Signature PIN Code
You can use the Signature PIN code when you need a
digital signature. Signature PIN code varies depending on
the certifications. You can change the Signature PIN code
to any four- to eight-digit number as necessary.
For values of the default Signature PIN code, contact the
issuer of the signature certifications.
 PUK Code (Common to PIN1 Code/
Security PIN Code)
In case PIN1 code or Security PIN code is locked, you can
unlock it by entering PUK code.
PUK code is an eight-digit number given at the time of
purchase, which is printed on the back side of the plastic
card on which your micro au IC-Card is attached.
After entering PUK code, you need to set a new PIN1 code
or Security PIN code.
If PUK code is incorrectly entered ten times consecutively,
contact an au shop, PiPit or Customer Service Center.
 PUK Code (Signature PIN Code)
In case Signature PIN code is locked, you can unlock it by
entering PUK code.
After entering PUK code, you need to set a new Signature
PIN code.
If PUK code is incorrectly entered ten times consecutively,
you will not be able to use the digital signature. In this case,
contact the issuer of the signature certifications.
PUK code varies depending on the certifications.
• PIN code is not reset by initializing the product.