AU pt003 - Address Book; Address Book Saving an Address Book Entry; Dialing from the Address Book; Editing Address Book Entries

45
Address Book
Address Book
Saving an Address Book Entry
When the standby screen is displayed, hold down
& for at least one second.
󰾯 Use j to select
[Name] and then press
c (Edit).
󰾯 Enter a name and then press c (OK).
The [Reading] for the name is entered automatically.
󰾯 Use j to select [Tel. #1] and then press
c (Edit).
󰾯 Enter a phone number and then press c (OK).
• If the phone number is for a fixed-line phone, enter the
phone number starting with the area code.
󰾯 Use j to select a phone number type and
then press c (Select).
• Follow the next step to enter an e-mail address. If
you do not want to enter an e-mail address, press
% (Reg).
󰾯 Use j to select [E-Mail 1] and then press
c (Edit).
󰾯 Enter an e-mail address and then press
c (OK).
󰾯 Use j to select an e-mail address type and
then press c (Select).
󰾯 Press % (Reg).
• The address book can store up to 1,000 entries.
• The cell phone automatically saves an entry to the
lowest available memory number from 000 to 999.
• You can save three phone numbers and three e-mail
addresses for each address book entry.
• You can also assign a group No., and enter birthday,
address, and other information.
Dialing from the Address Book
When the standby screen is displayed, press &.
󰾯 Use a to select the entry containing the
phone number you want to dial and then press
c (Select).
󰾯 Use j to select the phone number and then
press c (Call).
󰾯 Use j to select Call and then press
c (Select).
Editing Address Book Entries
When the standby screen is displayed, press &.
󰾯 Select an entry and press c (Select).
󰾯 Press % (Menu).
󰾯 Use j to select Edit and then press c
c (Select).
󰾯 Edit the contents and then press % (Reg).
󰾯 Use j to select Yes and then press c (OK).