AU pt003 - Rejecting Spam; Using C-Mail; Creating and Sending C-Mail Messages

50
Mail
Rejecting Spam
Setting mail filters to reject spam is recommended.
The Recommended Settings help you to set mail filters
easily.
■ Recommended Settings
Mail filter is set to reject spoofing mail, auto-forwarding mail
and to receive mail sent from a cell phone, PHS, or PC.
When the standby screen is displayed, press L.
󰾯 Use j to select E-Mail Setup and then press
c (Select).
󰾯 Use j to select Mail Filter and then press
c (Select).
󰾯 Use j to select

(Recommended settings) and then press
c (Select).
󰾯 Use j to select
 (Registration) and then
press c (Select).
• You can also prevent spam by changing your e-mail
address. For details on changing your e-mail address,
see page 31.
Using C-mail
C-mail is a service that uses phone numbers as addresses
to exchange messages between cell phones. You can
also send a message to the overseas local mobile phone
number. A C-mail message can contain up to 140 single-
byte (or 70 double-byte) characters.
• The C-mail send charge applies when sending C-mail.
 C-mail Safety Block
C-mail safety block is a function that allows you to reject
C-mails that include URLs (http://△△△, https://△△△) or
phone numbers in the C-mail message text.
C-mail safety block is valid by default. Cancel the setting if
you want to receive C-mails that include URLs and phone
numbers in the message text.
Creating and Sending C-mail Messages
When the standby screen is displayed, hold down
L for at least one second.
󰾯 Use j to select Create New and then press
c (Select).
󰾯 Use j to select
[To] and then press
c (Edit).
󰾯 Use j to select Address Book and then press
c (Select).