38
Making and Answering Calls
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use a to select Settings and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select Volume and then press
c (Select).
Use j to adjust the volume and then press
c (OK).
• Each press of j changes the volume one step.
Step up
The ring tone volume gradually increases.
Step down
The ring tone volume gradually decreases.
5
1
The ring tone sounds at the set volume.
The ring tone does not sound.
Turning On the Easy Voice Memo
When the standby screen is displayed, hold down
C for at least one second.
is displayed on the standby screen.
Turning Off the Easy Voice Memo
When the standby screen is displayed, hold down C for
at least one second. The easy voice memo is turned off and
disappears from the standby screen.
• The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
• Easy voice memo is a function that automatically
answers calls and allows callers to record messages.
Use the Answering Service (Voice Mail) when your
phone is turned off or when you are in a location where
a signal cannot be received.
Playing a Message
If a message is recorded, Easy Voice Memo appears
on the standby screen.
Use a to select Easy Voice Memo and then
press c (OK).
Use j to select the message you want to play
and then press c (Play).
• To stop playing the message, press c (Stop).
To Next Page
Loading...
