AUDAC MTX48 - Chapter 4 User Interface and Configuration; Open the User Interface

23
Chapter 4
User interface & configuration
Togetaccesstothecontrolandconfigurationsettings,theMTXshouldbeconnectedtoa
computeroranEthernetLANnetwork.Formoreinformationaboutnetworkconnections
andsettings,seeIPbasicsinchapter8.
Thestandard(factorydefault)IPaddressoftheMTXis192.168.0.192,makesurethis
addressiswithintheIPrangeoftheconnectedEthernetLANnetwork(subnetmask
255.255.255.0).IfthedefaultnetworkaddressisnotwithinrangeofyourLANnetwork,
contactyournetworkspecialist.ThenetworkaddresscanbechangedwiththeStandard
WebBasedUserInterfacebutthereforeanetworkconnectionhastobemadefirst!
Anydevice(PC,Laptop,PDAorevenaSmartphone)withawebbrowserandthe
MacromediaFlash8.0plug-in(orhigher)installed,canbeusedtocontrolthewebbased
userinterface.
Formobiledevices,suchasPDA’s,smartphonesoreveniPhonesoriPads,special
applicationsaredevelopedtocontrolthestandardfunctionsoftheR2Matrix.
Open the user interface
Start your default web browser and enter in the address bar the IP address of the embedded web
server of the MTX. (The factory default IP address is http://192.168.0.192).
Login screen
Firsttheloginscreenwillbedisplayed.
ApasswordshouldbeenteredtogetaccesstothewebinterfaceoftheMTXmatrix.
Therearetwodifferentaccesslevels,administratorlevelanduserlevel.
Ifyoulog-inusingtheadministratorpassword,yougetaccesstoallfunctionsand
configurationoptionsoftheMTXMatrix(Thefactorydefaultpasswordforadministrator
accesis“MTX”).
Whenyoulog-inusingtheuser password,youonlygetaccesstothebasicfunctionsof
theMTXmatrix,suchaschangingthevolumeandchangingtheroutingforaparticular
outputzone.(Thefactorydefaultpasswordforuseraccesis“user”).
Aftertherightpasswordisentered,clickthe“OK”button,andyouwillberedirectedto
themainscreenoftheMTXinterface.
NOTE
ThepasswordscanbechangedintheConfiguration>>Passwordsettingsmenu(Only
administrator)