AUDAC MTX48 - Factory Settings Reset

34
Settings >> Factory settings reset
ATTENTION
BE CAREFULL
topressthisbutton.ItreallywillrecalltheORIGINALfactorysettings!!!
Itdoesnotrecallthepreviouslysavedsettings,butitrecallstheoriginalfactorysettingand
thepreviouslymadesettingswillbelost.
Clickthe“OK”buttontoresetthesettingstofactorydefault.
Thefollowingsettingswillreturnbacktotheirdefaultvalue:
(Defaultvaluealsoshownbelow)
Mainvolume:-20 dB
Selectedinput:Input 1
Bass:0 dB
Treble:0 dB
Mute:Off
Priority1:Disabled
Priority2: Disabled
Pagingvolume:-10 dB
Adminstratorpassword:MTX
Userpassword:user
Blockfrontsettings:All disabled
IPAddress:192.168.0.192
Subnetmask:255.255.255.0
Allinputsenabled in“QuickSelectionMenu”