AudioCodes 440HD - Figure 3-4: Entering a Symbol (E.g., a Dot); Figure 3-5: Reverting to Letters (E.g., Abc)

User's Manual 3. Getting Started
Version 2.0.13B 21 430HD and 440HD IP Phone
 To enter a symbol (e.g., dot or @ or hyphen):
1. If you're not in lower case alphabetical mode, press the A/a/1 softkey and navigate to abc
(mandatory). You can also access the mode menu by pressing the # key on the keypad –
press the # key successively to navigate in the menu.
2. Press the 1 key on the keypad; a period / full stop is entered. Immediately press the 1 key
again; a backslash is entered. Pressing successively produces:
Symbol Explanation Symbol Explanation
. Dot * Star sign
\ Backslash = Equal sign
@ At | Separator
; Semi-colon ( Open parenthesis
: Colon ) Close parenthesis
# Pound { Open parenthesis
$ Dollar } Close parenthesis
% Percentage [ Open square parenthesis
^ Caret ] Close square parenthesis
& Ampersand " Double quotation marks
! Exclamation mark ' Single quotation mark
? Question mark > Greater than
+ Plus < Less than
- Hyphen , Comma
_ Underscore / Forward slash
~ Approximates
Note that the asterisk (*) symbol is entered directly using the star key.
Figure 3-4: Entering a Symbol (e.g., a dot)
 To revert to letters (e.g., abc):

Press the A/a/1 softkey (or the # key on the keypad) and navigate to abc mode.
Figure 3-5: Reverting to Letters (e.g., abc)