User's Manual 3. Getting Started
Version 2.0.13B 17 430HD and 440HD IP Phone
3 Getting Started
This section gets you started with the phone. The phone features an LCD, providing an intuitive,
menu-driven user interface for configuring the device and viewing call information.
This section shows how to use the phone’s LCD but before using the LCD, you must sign in.
3.1 Getting Acquainted with the LCD
This section gets you acquainted with the LCD.
Note:
• Screenshots of the 440HD LCD are shown in this manual.
• 430HD LCD screens are identical unless indicated otherwise.
The figure below shows the phone’s LCD in idle state.
Figure 3-1: LCD in Idle State
Reference:
Table 3-1: LCD in Idle State
Reference Description
1
Presence status (Available, Busy, Do not disturb, Away, or Be right back).
See Section 4.21 on page 56 for details.
User name, configured by your system administrator using the Web interface, and phone
number.
2
Day, Date and Month (automatically retrieved from the Network Time Protocol (NTP)
server, enabled by your system administrator).
Time (automatically retrieved from the Network Time Protocol (NTP) server, enabled by
your system administrator).
3
Softkeys; to activate a softkey, press the key on the device, below the LCD, corresponding
to the softkey. See Table 3-2 for softkey descriptions.
To Next Page
Loading...
