430HD and 440HD IP Phone
User's Manual 30 Document #: LTRT-11937
4.2 Selecting Ring Tone
You can choose from a selection of ring tones to indicate incoming calls .
To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2. Navigate to and select a ring tone. A sample of each ring tone is played as you navigate
through the list.
3. Set ring tone volume by pressing the VOL or VOL
key:
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Press the Select softkey to apply your settings.
5. Press the Save softkey to save your settings.
To Next Page
Loading...
