430HD and 440HD IP Phone
User's Manual 90 Document #: LTRT-11937
To make a call on behalf of Boss using Boss' line key:
1. In the Admin's phone's idle screen, press the Boss' line key; this screen opens:
2. Navigate down and select the Call on behalf option; the NEW CALL screen opens.
3. Enter the number of the destination to call and press the enabled Dial softkey; the number is
dialed; the other end rings.
4. The called party views an incoming call from Admin on behalf of Boss.
5. The called party answers; the phone displays this screen:
6.3.5.2 Using the Destination Phone Number's Keys
You can make a call on behalf of Boss by pressing the destination phone number's keys.
To make a call on behalf of Boss:
1. On the phone's dial pad, press the first digit key of the destination number; the NEW CALL
screen opens displaying the Call on behalf softkey:
2. Enter the rest of the destination number and then press the Call on behalf softkey; the
Bosses List screen opens:
3. Navigate to the Boss on behalf of whom to call (the screen above shows only one configured
Boss, Alan Roberts, as an example), and then press the Dial softkey; the called party's
phone shows an INCOMING CALL on behalf of Alan Roberts.
To Next Page
Loading...
