AudioCodes Mediant 500L - Powering the Device on; off

BroadCloud SIP Trunk
AudioCodes Mediant E-SBC 10 Document #: LTRT-12552
Figure 2-5: Inserting Plug into Power Adapter
2. Insert the DC plug (5) located at the end of the power cord (4) of the power adapter
into the device's power socket located on the rear panel.
Figure 2-6: Cabling to Power using Power Adapter
3. Plug the power adapter directly into a standard electrical wall outlet.
2.1.4 Powering the Device On / Off
The power switch is located on its rear panel (see Section 2.1.2).
 To power on the device:

Press in the power button; the device receives power and the Power LED on the front
panel lights up.
 To power off the device:

Press out the power button; the device powers off and the Power LED goes off.