AudioCodes Mediant 500L - Step 5: Configure SIP Host Name for the IP-PBX

BroadCloud SIP Trunk
AudioCodes Mediant E-SBC 32 Document #: LTRT-12552
4.5 Step 5: Configure SIP Host Name for the IP-PBX
This section shows how to configure the SIP Host Name used in INVITE and REGISTER
messages sent to the IP-PBX. This is dependent on the IP-PBX.
 To configure a SIP host name for the IP-PBX:
1. Open the IP Group Table page (Configuration tab > VoIP menu > VoIP Network >
IP Group Table).
2. Edit the SIP Host Name in the 'SIP Group Name' field, with the value required by the
IP-PBX.
Parameter Value
Index
0
Name
IP-PBX
Type
Server
Proxy Set
IP-PBX
IP Profile
IP-PBX
Media Realm
MRLan
SIP Group Name 172.26.100.170 (according to IP-PBX requirement)
Figure 4-13: Configured IP Groups in IP Group Table