BroadCloud SIP Trunk
AudioCodes Mediant E-SBC 14 Document #: LTRT-12552
2.3 Mediant 800B E-SBC
2.3.1 Front Panel
Figure 2-12: Front Panel
Table 2-8: Front Panel Description
Item
#
Label Description
1 USB/WWAN N/A
2 RS-232 RS-232 port for serial communication. Cable not included.
3 POWER/STATUS
LEDs indicating power and reboot/initialization status. See also Section 2.3.2 on page 14.
5 - Reset pinhole button to reset and optionally to restore factory defaults. To restore to factory
defaults: Press and hold down the Reset pinhole button with a paper clip or similar pointed
object, for at least 12 seconds but no more than 25.
6 GE Four 10/100/1000Base-T (Gigabit Ethernet) LAN/WAN ports.
7 FE N/A
2.3.2 Front Panel LEDs
2.3.2.1 Operational Status LEDs
The STATUS LED indicates the operating status.
Table 2-9: STATUS LEDs
LED Color LED State Description
Green On The device is operational and in Standalone mode (not in High-Availability mode).
Flashing Initial rebooting stage.
Slow Flash HA mode - LED on Active device.
Slow-Fast
Flash
HA mode - LED on Redundant device.
Red On Boot failure.
Off Advanced rebooting stage.
To Next Page
Loading...
