AudioCodes Mediant E-SBC 4. Configuring the Device
BroadCloud SIP Trunk 21 AudioCodes Mediant E-SBC
4 Configuring the Device
4.1 Step 1: Download, Install BroadCloud Certified
Firmware / Configuration
This section shows how to download the certified BroadCloud firmware and configuration.
To download the certified BroadCloud firmware and configuration:
1. Open a web browser, go to http://www.audiocodes.com/broadcloud-resource-center
2. Download the zip file associated with your device, unzip the package, and save the
enclosed configuration_xxxx.ini file and firmware_xxx.cmp file to your local drive.
3. Download the Call Progress Tones file suitable for your country –
call_progress_xxxxx.dat (‘xxxxx’ being the country name).
4. Enter the device's Software Upgrade Wizard.
To load files using the Software Upgrade Wizard:
1. Open the Software Upgrade Wizard by performing one of the following:
• Select the Maintenance tab, click the Software Update menu, and then click
Software Upgrade Wizard.
• On the toolbar, click Device Actions, and then choose Software Upgrade
Wizard.
Figure 4-1: Start Software Upgrade Wizard Screen
2. Click Start Software Upgrade; the Wizard starts, prompting you to load a .cmp file:
To Next Page
Loading...
