AudioCodes Mediant 500L - Step 7: Configure Registration to the Broadcloud Service; Configure Credentials

AudioCodes Mediant E-SBC 4. Configuring the Device
BroadCloud SIP Trunk 35 AudioCodes Mediant E-SBC
4.7 Step 7: Configure Registration to the BroadCloud
Service
4.7.1 Configure Credentials
This step shows how to configure SIP registration towards the BroadCloud service. This is
required so that the E-SBC can register with the BroadCloud SIP Trunk on behalf of the
IP-PBX. The BroadCloud SIP Trunk requires registration and authentication to provide
service. These parameters should be supplied by the service provider.
 To configure a registration account:
1. Open the Account Table page (Configuration tab > VoIP menu > SIP Definitions >
Account Table).
2. Edit the first row (index 0) to configure the account.
Parameter Value
Application Type
SBC
Served IP Group
IP-PBX
Serving IP Group
BroadCloud
Username BroadCloud SIP User. The BroadCloud SIP User value is found
on the BroadCloud MySite Trunk Group configuration page under
the ‘Device Settings for Authentication’ section.
Password BroadCloud SIP Password. The BroadCloud SIP Password
value is found on the BroadCloud MySite Trunk Group
configuration page under the ‘Device Settings for Authentication’
section.
Host Name BroadCloud Register Domain. The BroadCloud Register
Domain is found on the BroadCloud MySite Trunk Group
configuration page under the ‘Trunk Group Settings’ section.
Register
Regular
Contact User BroadCloud SIP User (as the 'Username' above)
The BroadCloud SIP User is found on the BroadCloud My Trunk
Group configuration page under the ‘Device Settings for
Authentication’ section.
3. Click Apply.