AudioCodes Mediant 500L - 1 Introduction; Making Broadcloud Preparations; Component Information; Audiocodes E-SBC Version

AudioCodes Mediant E-SBC 1. Introduction
BroadCloud SIP Trunk 5 AudioCodes Mediant E-SBC
1 Introduction
This Configuration Note shows how to set up AudioCodes' Enterprise Session Border
Controller (referred to as E-SBC in this document) for interworking between BroadCloud's
SIP Trunk and IP-PBX environment.
1.1 Making BroadCloud Preparations
Before reading and using this Quick Setup Guide, read the BroadCloud SIP Trunking
Service Definition guide available from the BroadCloud knowledgebase
(info.broadcloudpbx.com).
Note: The BroadCloud SIP Trunking Service Definition guide details how to provision
SIP Trunk Groups, SIP Trunk Users and SIP Trunk Mobility Users. This guide assumes
you've read that guide, and that the required provisioning has been completed.
When provisioning, select the appropriate Shared Device Type:
AudioCodes Mediant Device
Note: If you do not have this device type available in your service offering, contact your
Account Manager who will arrange it for you.
1.2 Component Information
1.2.1 AudioCodes E-SBC Version
Table 1-1: AudioCodes E-SBC Version
SBC Vendor
AudioCodes
Models
 Mediant 500L
 Mediant 500
 Mediant 800
Software Version
SIP_F7.00A.044.007
Protocol
 SIP/UDP (to the BroadCloud SIP Trunk)
 SIP/UDP or SIP/TCP (to the IP-PBX)
1.2.2 BroadCloud SIP Trunking Version
Table 1-2: BroadCloud Version
Vendor/Service Provider
BroadCloud
SSW Model/Service
BroadWorks
Software Version
21
Protocol
SIP/UDP