AudioCodes Mediant E-SBC 3. Connecting to the Management Interface
BroadCloud SIP Trunk 19 AudioCodes Mediant E-SBC
3 Connecting to the Management Interface
This section shows how to connect to the device's management interface for the first time.
3.1 Default OAMP IP Address
The device is shipped with a factory default IP address for operations, administration,
maintenance, and provisioning (OAMP), through its network interface. Use this address to
initially access the device's embedded Web server. Default IP address is:
Table 3-1: Default VoIP LAN IP Address for OAMP
IP Address Value
IP Address 192.168.0.2
Prefix Length 255.255.255.0 (24)
Default Gateway 192.168.0.1
3.2 Connecting to the Embedded Web Server
This section shows how to connect to the embedded Web server.
To connect to the embedded Web server:
1. Connect Port 1 (leftmost LAN port) located on the front panel directly to the network
interface of your computer, using a straight-through Ethernet cable.
Figure 3-1: Connecting to the Embedded Web Server
To Next Page
Loading...
