EasyManua.ls Logo

AudioCodes Mediant 500L - 2 Installing the Hardware; Mediant 500 L Media Gateway; Front Panel; Rear Panel

AudioCodes Mediant 500L
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AudioCodes Mediant E-SBC 2. Installing the Hardware
BroadCloud SIP Trunk 7 AudioCodes Mediant E-SBC
2 Installing the Hardware
2.1 Mediant 500L Media Gateway
2.1.1 Front Panel
LEDs on the front panel indicate functionality statuses.
Figure 2-1: Front Panel - LEDs
When green, 1 (power LED) indicates power is on. Table 2-1 describes 2 (Status LED).
Table 2-1: Status LED
LED
Color
LED State Description
Green On Device is operational.
Flashing Initial rebooting stage.
Red On Boot failure.
- Off Advanced rebooting stage.
2.1.2 Rear Panel
Figure 2-2: Rear Panel
Table 2-2: Rear Panel
Item # Label Description
1 POWER 12V -- 3A AC power supply plug entry to connect to the external AC power supply adapter.
2 ON / OFF Power button which powers on the device when pressed in and powers off the device when
pressed again (pressed out).
3 CONSOLE RJ-45 port for RS-232 serial communication with the device.

Other manuals for AudioCodes Mediant 500L

Related product manuals