AudioCodes Mediant E-SBC 4. Configuring the Device
BroadCloud SIP Trunk 31 AudioCodes Mediant E-SBC
4.4 Step 4: Configure IP-PBX IP Address
This section shows how to configure the IP-PBX's IP address.
To configure the IP-PBX's IP address:
1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > VoIP Network >
Proxy Sets Table).
2. Edit the Proxy Set for the IP-PBX (you can identify it by the 'Proxy Name' field)
3. Configure a Proxy Address Table for Proxy Set for IP-PBX:
a. Go to Configuration tab > VoIP menu > VoIP Network > Proxy Sets Table >
Proxy Address Table.
Parameter Value
Index
0
Proxy Address IP-PBX IP address / FQDN and
destination port
e.g. 172.26.100.170:5060
Transport Type Network transport type (Select the
method that your IP-PBX is requiring)
e.g. UDP
Figure 4-12: Configuring Proxy Address for IP-PBX
To Next Page
Loading...
