AudioCodes Mediant E-SBC 2. Installing the Hardware
BroadCloud SIP Trunk 17 AudioCodes Mediant E-SBC
To connect the device to the power supply:
1. Connect the line socket of the AC power cord (supplied) to the device's AC power
socket (labeled 100-240V 1.5A ~50-60 Hz), located on the rear panel.
Figure 2-16: Connecting to the Power Supply
2. Connect the plug at the other end of the AC power cord to a standard electrical outlet.
After cabling and powering up, the POWER LED on the front panel lights up green.
To Next Page
Loading...
