MSBR Series 13 MSBR Series
Hardware Installation Manual 2. Unpacking the Device
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device was shipped.
To unpack the device:
1. Open the carton and carefully remove packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
• Four anti-slide bumpers for desktop installation
• Two mounting brackets for 19-inch rack mounting
• (Mediant 800C MSBR) Two cellular antennas (if ordered with LTE)
• One AC power cable
• (Mediant 800C MSBR) one AC/DC power adaptor (optional, separate orderable
item)
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
To Next Page
Loading...
