AudioCodes Mediant 800 MSBR - Lte Led; Fxs Led; Table 3-10: LTE LED Description; Table 3-11: FXS LED Description

Hardware Installation Manual 22 Document #: LTRT-10236
Mediant 800 MSBR
3.2.2.3 LTE LED
The LTE LED indicates the 3G or 4G (LTE) cellular link status, as described in the table
below.
Table 3-10: LTE LED Description
LED
Color
LED
State
Description
Green On Connected to the cellular network.
Flashing In the process of connecting to the cellular network.
Red On No SIM card in the SIM slot, or if there is a SIM card, the device
cannot connect to the cellular network.
- Off Cellular WAN interface has not been configured (or the
functionality is not included in the device's installed License Key).
Note: SHDSL is applicable only to Mediant 800C MSBR.
3.2.2.4 FXS LED
Each FXS port provides a LED for indicating operating status, as described in the table
below.
Table 3-11: FXS LED Description
LED
Color
LED
State
Description
Green On Phone is off-hooked.
Flashing Rings the extension line.
Red On
 Error - malfunction in line or out of service due to Serial
Peripheral Interface (SPI) failure
 Disabled port initiated by user (using the CLI command,
analog-port-enable
)
- Off Phone is on hook.
- Off No power received by the device.