Hardware Installation Manual 20 Document #: LTRT-10236
Mediant 800 MSBR
3.2.2.2.2 E1/T1 WAN LED
The E1/T1 WAN port provides a LED for indicating operating status, as described in the
table below.
Table 3-6: E1/T1 WAN LED Description
LED
Color
LED
State
Description
Green On Link up.
Flashing Connection in progress.
- Off No link.
Note: E1/T1 WAN is applicable only to Mediant 800B MSBR.
3.2.2.2.3 SHDSL WAN LED
The SHDSL WAN port provides a LED for indicating operating status, as described in the
table below.
Table 3-7: SHDSL WAN LED Description
LED
Color
LED
State
Description
Green On At least one of the links is synchronized.
Fast
Flashing
At least one of the links is initializing.
Slow
Flashing
SHDSL firmware is running.
- Off No WAN link or no power received by the device.
Note: SHDSL is applicable only to Mediant 800B MSBR.
To Next Page
Loading...
