AudioCodes Mediant 800 MSBR - Figure 5-12: Example of Splitter Cable for Single E1;T1 WAN Port; Figure 5-13: Connecting E1;T1 WAN Port - Mediant 800 B MSBR; Figure 5-14: Connecting T1 WAN Port - Mediant 800 C MSBR

MSBR Series 43 MSBR Series
Hardware Installation Manual 5. Cabling the Device
Figure 5-12: Example of Splitter Cable for Single E1/T1 WAN Port
Warning: To protect against electrical shock and fire, use a 26 AWG min wire to
connect the T1 WAN port.
 To connect the E1/T1 WAN port to E1/T1 lines:
1. Connect the RJ-45 connector on one end of the cable to the E1/T1 WAN port, labeled
T1E1.
Figure 5-13: Connecting E1/T1 WAN Port – Mediant 800B MSBR
Figure 5-14: Connecting T1 WAN Port – Mediant 800C MSBR
2. Connect the other end of the cable to the E1 or T1 line.