AudioCodes Mediant 800 MSBR - Figure 5-35: Cabling E1;T1 Ports - Mediant 800 B MSBR; Figure 5-36: Cabling E1;T1 Ports - Mediant 800 C MSBR

MSBR Series 57 MSBR Series
Hardware Installation Manual 5. Cabling the Device
 To connect the E1/T1 trunk interface:
1. Connect the E1/T1 trunk cable to the device’s E1/T1 port located on the PRI module.
Figure 5-35: Cabling E1/T1 Ports – Mediant 800B MSBR
Figure 5-36: Cabling E1/T1 Ports – Mediant 800C MSBR
2. Connect the other end of the trunk cable to your PBX/PSTN switch.