AudioCodes Mediant 800 MSBR - Figure 5-30: Cabling BRI Ports - Mediant 800 B MSBR; Figure 5-31: Cabling BRI Ports - Mediant 800 C MSBR

Hardware Installation Manual 54 Document #: LTRT-10236
Mediant 800 MSBR
Warning:
• BRI port cabling must be routed only indoors and must not exit the building.
• To protect against electrical shock and fire, use a 26 AWG min wire to connect the
BRI ports to the PSTN.
Note: BRI interface is a separate orderable item.
 To connect the BRI ports:
1. Connect the BRI cable to the device's BRI RJ-45 port.
2. Connect the other end of the cable to your ISDN telephone or PBX/PSTN switch.
Figure 5-30: Cabling BRI Ports – Mediant 800B MSBR
Figure 5-31: Cabling BRI Ports – Mediant 800C MSBR