MSBR Series 47 MSBR Series
Hardware Installation Manual 5. Cabling the Device
4. Insert the SIM card (supplied by your service provider) into the SIM slot, located on the
rear panel, by pushing it into the slot until you hear a clicking sound. Make sure that
the orientation of the SIM card is as shown in the figure below, where the front of the
card with the cut-off corner enters the slot first. (To remove the SIM card, push the SIM
card to eject it out of the slot.)
Figure 5-18: Inserting SIM Card into SIM Slot
5. Mount the device in a location that receives the best LTE connection (signal).
To Next Page
Loading...
