AudioCodes Mediant 800 MSBR - Figure 5-38: Cabling Serial Interface - Mediant 800 B MSBR; Figure 5-39: Cabling Serial Interface - Mediant 800 C MSBR

MSBR Series 59 MSBR Series
Hardware Installation Manual 5. Cabling the Device
 To connect the device's serial interface to a PC:
1. Connect the RJ-45 cable connector to the device's serial port, labeled CONSOLE.
2. Connect the other end of the cable to the COM1 or COM2 RS-232 communication port
on your PC.
Figure 5-38: Cabling Serial Interface - Mediant 800B MSBR
Figure 5-39: Cabling Serial Interface - Mediant 800C MSBR