AudioCodes Mediant 800 MSBR - Mediant 800 C MSBR; Figure 3-2: Mediant 800 C MSBR Front Panel; Table 3-3: Mediant 800 C MSBR Front Panel Description

MSBR Series 17 MSBR Series
Hardware Installation Manual 3. Physical Description
3.2.1.2 Mediant 800C MSBR
Figure 3-2: Mediant 800C MSBR Front Panel
Table 3-3: Mediant 800C MSBR Front Panel Description
Item # Label Description
1 AC PWR / DC PWR /
STATUS
Power and operating status LEDs. For more information, see
Section 3.2.2 on page 19.
2 FXS / FXO / BRI / PRI (Optional) Telephony port interfaces, which can include one
or a combination of the following, depending on ordered
model:
• FXS port interfaces (RJ-11)
• ISDN BRI port interfaces (RJ-45)
• ISDN PRI (E1/T1) port interfaces (RJ-48)
Note: The FXS interfaces support loop-start signalling
(indoor only).
3
LTE
LTE cellular status LED. For more information, see Section
3.2.2.3 on page 22.
Note: The LED is applicable only to models ordered with the
4G LTE cellular functionality.
4 SIM card slot for 4G LTE cellular.
Note: The SIM card slot is applicable only to models ordered
with the 4G LTE cellular functionality.
5 GE / V/ADSLoPOTS /
DSLoISDN / DSLoPOTS /
GE SFP
(Optional) One or two additional WAN interfaces (copper
GE, SFP, and A/VDSL). For a list of supported WAN
configurations, please contact your AudioCodes sales
representative.
Note: Gigabit Ethernet (10/100/1000Base-T) copper WAN
interface (RJ-45) is provided on all models.
6 GE Up to four Gigabit Ethernet (10/100/1000Base-T) LAN ports
for connecting IP phones, computers, or switches. These
ports support half- and full-duplex modes, auto-negotiation,
and straight or crossover cable detection.