Hardware Installation Manual 8 Document #: LTRT-10236
Mediant 800 MSBR
Notes and Warnings
Warning: The device is an INDOOR unit and therefore, must be installed only indoors.
Note: Open source software may have been added and/or amended for this product. For
further information, please visit our website at https://www.audiocodes.com/services-
support/open-source/ or contact your AudioCodes sales representative.
Caution Electrical Shock
Do not open or disassemble this device. The device carries high voltage and
contact with internal components may expose you to electrical shock and bodily
harm.
Warning: The device must be installed and serviced only by qualified service personnel.
Warning: For deployment in Finland, Sweden and Norway, the device must be installed
ONLY in restricted access locations that are compliant with ETS 300253 guidelines here
equipotential bonding has been implemented.
Warning: Disconnect the device from the mains and Telephone Network Voltage (TNV)
before servicing.
Document Revision Record
LTRT Description
10210 Initial document release for Version 6.8.
10220 SHDSL LEDs added.
10221 A/VDSL and SHDSL LEDs updated.
10222 E1 cabling warning statement regarding STP.
10223 Power surge protection warnings.
10224 DSL connector pinouts updated.
10225 AC power cable warning (Japanese); STATUS LED update.
10225 A/VDSL port (RJ-45) cabling.
10227 BRI/PRI cabling warning.
10228 Typo fixed re 19-inch rack mounting brackets.
To Next Page
Loading...
Need help?
General
